UD100619: Doosan DMV6025s

Doosan DMV6025s, Vertical Machining Center, Fanuc 18iMB Control, 4,500 RPM, CT50 Spindle with Gearbox, 230 PSI Through Spindle Coolant, 30 Tool ATC, Turbo Hinge Belt Conveyor, (New 2005) s/n AV6X0314 Stock# UD100619

---

Specifications:

CAPACITY:
X axis travel: 59.8 inches
Y axis travel: 25.6 inches
Z axis travel: 25.6 inches
Table size: 28.7 x 70.8 inches
Allowable table load: 4,400 pounds
Table T - slot spacing: x width (5) 4.92" x .71"

SPINDLE:
Spindle nose to table top: 7.1 to 32.7 inches
Column to spindle center: 26.8 inches
Spindle taper: ISO No. 50
Spindle speed: 20 - 4500 RPM
Spindle gear ranges: 2
A.C. spindle motor (30 min.): 30 HP
Spindle torque (30 min.): 428 ft-lbs.

AUTOMATIC TOOL CHANGER:
Number of tools: 30
Tool shank: CAT 50
Pull Stud: 316-45
Max. tool Dia. (adj. pocket full): 5.1 inches with empty adjacent pockets 9 inches
Max. tool Length: 13.8 inches
Max. tool Weight: 33 lbs.
Tool change time (tool to tool): 2.5 sec.
Tool change time (chip to chip): 6.5 sec.

MOTION:
Rapid traverse rate: 512 IPM
Maximum linear feedrate: 315 IPM
A.C. servo motors X,Y&Z: 4 HP
Feed Thrust Z axis: 3,095 lbs.

GENERAL:
Floor space required (L x W): 184 inches x 168 inches
Machine height: 141 inches
Machine weight: 27,500 lbs.
Voltage required: 205 - 235 volts / 3 phase
KVA required: 60

Haas TM-1, tool room mill, 12" x 30", 4,000 RPM, 7.5 HP, S/N 26282, 2001 Stock# UD100576

Daewoo DVC 320, Daewoo DVC 320 Vertical Machining Center with Integral Pallet Changer and Fanuc 21iM CNC Control, #30 Taper Spindle, 10,000 RPM, including hinge belt Turbo Chip Conveyor, S/N TC320066, 2002 Stock# UD100635

Haas VF 0, 16 Station Drum ATC, Rigid Tapping, 7,500 RPM, S/N 19420, 1999 Stock# UD100601

Haas VF2SS, Inline spindle, 24 Station Cam Type ATC, 12,000 RPM, 1400 IPM, S/N 37352, 2004 Stock# UD100600

Haas MDC-500, Vertical Machining Center with pallet changer style table, 20" x 14" Travels, Swing Arm ATC, 40-Taper, 10,000-RPM, S/N 1105597, 2013 Stock# UD100647

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1359, 2009 Stock# UD100627

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1348, 2009 Stock# UD100622

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1360, 2009 Stock# UD100623

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1361, 2009 Stock# UD100625

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1347, 2009 Stock# UD100629

Fryer VB60, Siemens Touch 2200, 60" (X) x 30" (Y) x 28" (Z), 25 HP, 8,000 RPM, two speed gearbox, 20 tool ATC, 1,000 IPM rapid, w/probe, chiller, S/N 60294, 2011 Stock# UD100573

Milltronics RH33, Rigid Head Bed Mill, #50 taper, 24 ATC, Box Way, X, Y of 78"x 33", 28" Z-axis, 4" riser, S/N 10492, 2011 Stock# UD100604

Okuma Millac 1052V, OSP P200M, 41.73" Y-axis, 80.71" X-axis, 31.5" Z-axis, 6,000 RPM, Cat 50, CTS, 36 ATC, 1,000 PSI, S/N 11389, 2008 Stock# UD100589