UD100573: Fryer VB60

Fryer VB60, Siemens Touch 2200, 60" (X) x 30" (Y) x 28" (Z), 25 HP, 8,000 RPM, two speed gearbox, 20 tool ATC, 1,000 IPM rapid, w/probe, chiller, S/N 60294, 2011 Stock# UD100573

---

Specifications:

Machine Capacity:
X, Y & Z Travel: 60" x 30" x 28"
Rapid traverse rate: 1,000 IPM X & Y
Table load (evenly distributed): 4,000 lbs.
Table:
Table Size: 24" x 73"
T-Slots (No./Width): 5 / .709"
Tabletop to floor: 32"

Spindle:
Motor (Peak/Continuous): 25 HP
Gear box: 2-speed
Spindle Speed (Programmable): 60 - 10,000 RPM
Tool Type/Taper: CAT 40
Spindle Nose to Table (max. - min.): 30" - 2"
Spindle Center to Column: 30.5"
Automatic Tool Changer:
Tool Storage Capacity: 20
ATC change time: 7 seconds
Max adjacent tool capacity: 4.10"
Max tool weight: 14.5 lbs.

General Information:
Air Pressure Requirements: 90 PSI 5 CFM
Coolant Capacity: 20 Gallons, 3 GPM
Power Requirements - machine: 40A, 220V / 3P
Electrics: 440v/60cy./3 ph.
Machine Weight: 15,000 Lbs.

Haas TM-1, tool room mill, 12" x 30", 4,000 RPM, 7.5 HP, S/N 26282, 2001 Stock# UD100576

Daewoo DVC 320, Daewoo DVC 320 Vertical Machining Center with Integral Pallet Changer and Fanuc 21iM CNC Control, #30 Taper Spindle, 10,000 RPM, including hinge belt Turbo Chip Conveyor, S/N TC320066, 2002 Stock# UD100635

Haas VF 0, 16 Station Drum ATC, Rigid Tapping, 7,500 RPM, S/N 19420, 1999 Stock# UD100601

Haas VF2SS, Inline spindle, 24 Station Cam Type ATC, 12,000 RPM, 1400 IPM, S/N 37352, 2004 Stock# UD100600

Haas MDC-500, Vertical Machining Center with pallet changer style table, 20" x 14" Travels, Swing Arm ATC, 40-Taper, 10,000-RPM, S/N 1105597, 2013 Stock# UD100647

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1359, 2009 Stock# UD100627

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1348, 2009 Stock# UD100622

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1360, 2009 Stock# UD100623

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1361, 2009 Stock# UD100625

Hyundai Wia VX-500, 3-Axis Vertical Machining Center, Fanuc 0i-MC CNC Control, 24 Pocket Arm Type ATC, 40-Taper, 10,000-RPM, 290 PSI Through Spindle Coolant, Oil Chiller, Rear Discharge Chip Conveyor & augers, S/N G3684-1347, 2009 Stock# UD100629

Doosan DMV6025s, Vertical Machining Center, Fanuc 18iMB Control, 4,500 RPM, CT50 Spindle with Gearbox, 230 PSI Through Spindle Coolant, 30 Tool ATC, Turbo Hinge Belt Conveyor, (New 2005) s/n AV6X0314 Stock# UD100619

Milltronics RH33, Rigid Head Bed Mill, #50 taper, 24 ATC, Box Way, X, Y of 78"x 33", 28" Z-axis, 4" riser, S/N 10492, 2011 Stock# UD100604

Okuma Millac 1052V, OSP P200M, 41.73" Y-axis, 80.71" X-axis, 31.5" Z-axis, 6,000 RPM, Cat 50, CTS, 36 ATC, 1,000 PSI, S/N 11389, 2008 Stock# UD100589