Hyundai WIA XM3100ST
Horizontal Turning Center

---

Overview

Machine Features

• FANUC 31i-B5 Plus controller
• Main spindle: 4,000 RPM built-in motor
• Sub spindle: 4,000 RPM built-in motor
• Main spindle power: 40 HP (30 kW)
• Sub spindle power: 29.5 HP (22 kW)
• Maximum spindle torque: 534 lb-ft at 342 RPM (S3 25 percent duty)
• Main chuck: 10 in
• Sub chuck: 10 in
• Main bar capacity: 3.2 in (81 mm)
• Sub bar capacity: 3.2 in (81 mm)
• Maximum turning diameter with B-axis: 26.0 in (660 mm)
• Maximum turning diameter at turret: 16.1 in (410 mm)
• Maximum turning length: 60.6 in (1,540 mm)
• Milling head: 12,000 RPM built-in spindle with Capto C6 tool interface
• Milling spindle power: 29.5 HP (22 kW)
• Milling spindle torque: 88.5 lb-ft at 1,475 RPM
• B-axis travel range: 240 degrees (-120 degrees to +120 degrees)
• Y-axis travel: plus or minus 11.8 in (plus or minus 150 mm)
• Tool magazine capacity: 80 tools
• Lower turret with 12 tool stations
• Lower turret tool capacity: 1.0 in square turning tools, 1.5 in (40 mm) boring bars
• Lower turret live tooling: BMT 65, up to 5,000 RPM (optional)
• Lower turret live tool motor: 9 HP (6.7 kW), 19.9 lb-ft torque
• High-speed roller linear motion guideways
• Rapid traverse rates: X1 1,890 IPM, Z1 1,890 IPM, Y 1,417 IPM, X2 945 IPM, Z2 1,417 IPM, A-axis 1,181 IPM
• 87 PSI coolant system (1,015 PSI optional)
• Double pre-tensioned ball screws
• Chip conveyor with 46.8 in discharge height
• Three-color tower signal light
• Full enclosure splash guard