Hyundai WIA SE2600SY
Horizontal Turning Center

---

Overview

Machine Features

• Hyundai Wia FANUC Smart Plus controller
• FANUC Beta spindle drive with Beta X and Z servo motors
• Main spindle: 3,500 RPM belt-driven
• Main spindle motor: 25 HP (18.5 kW), S2 15 min duty, 347.3 lb-ft (470.9 Nm) torque at 375 RPM
• Main chuck: 10 in 3-jaw (sub spindle 6 in)
• Main bar capacity: 3.2 in (81 mm)
• Sub spindle: 4,500 RPM belt-driven
• Sub spindle motor: 10 HP (7.5 kW), S2 15 min duty, 62.7 lb-ft (85 Nm) torque at 845 RPM
• Sub chuck: 6 in 3-jaw
• Sub bar capacity: 2.0 in (51 mm)
• Maximum turning diameter: 15.0 in (380 mm)
• Maximum turning length: 24.8 in (630 mm)
• BMT 55P turret with 12 stations and 24 positions
• Y-axis travel: 4.3 in (110 mm)
• Tool capacity: 0.75 in square turning tools, 1.5 in (40 mm) boring bars
• Live tooling speed: up to 6,000 RPM (BMT 55P)
• Live tool motor: 7.4 HP (5.5 kW), S2 15 min duty, 38.7 lb-ft (52.5 Nm) torque at 1,000 RPM
• 30 degree slant, one-piece bed structure
• High-speed roller linear guideways
• Rapid traverse rates: X-axis 1,181 IPM (30 m/min), Z-axis 1,181 IPM (30 m/min)
• Rapid traverse rates: Y-axis 394 IPM (10 m/min), ZB-axis 591 IPM (15 m/min)
• 87 PSI coolant system (1,015 PSI optional)
• Double pre-tensioned ball screws
• Chip conveyor with 47 in discharge height
• Separate coolant tank
• Three-color tower signal light
• Parts catcher (main spindle on SE2600Y, sub spindle on SE2600SY)
• Full contouring C-axis