Hyundai WIA SE2600L
Horizontal Turning Center

---

Overview

Machine Features

• Hyundai Wia FANUC i-Series Smart Plus controller
• FANUC Beta spindle drive and Beta X/Z servo motors
• Maximum turning diameter: 18.1 in (460 mm)
• Maximum turning length: 43.0 in (1091 mm)
• Bar capacity: 3.2 in (81 mm)
• 3,500 RPM belt-driven main spindle
• 24.8 HP (18.5 kW) spindle motor, S3 15 percent duty
• Spindle torque: 347.3 lb-ft (470.9 Nm) at 375 RPM
• 10 in 3-jaw chuck
• 30 degree slant, one-piece cast iron bed structure
• Rapid traverse rates: X-axis 1,181 IPM (30 m/min), Z-axis 1,181 IPM (30 m/min)
• Tool capacity: 1 in square turning tools, 1.97 in (50 mm) boring bars
• Hydraulic NC tailstock with MT4 taper
• 87 PSI coolant system (145 PSI optional)
• Spindle speed override range: 0 to 150 percent in 10 percent increments
• Massive cast iron machine base
• Pre-tensioned, double-anchored ball screws
• Rigid tapping capability
• Program and data protection key switch
• Chip conveyor with 47 in discharge height
• Three-color tower signal light
• Full enclosure splash guard