Milltronics SL6-II
Horizontal Turning Center

---

Overview

Machine Features

• Chip conveyor
• 3-jaw hydraulic chuck with foot switch
• Bi-directional turning cycle
• Tail stock
• 12 position auto turret with 0.75? slots
• True slant bed with one-piece base casting
• Linear motion guideways with roller type bearings
• Full enclosure with sliding door
• Flood coolant
• Auto lubrication
• Part, wire frame & solid model graphics
• Constant Surface Speed (CSS)
• 120 GB solid-state hard drive
• 15? LCD color touch screen display
• Spindle load meter
• LCD hour meter
• One-year warranty
• Parts catcher
• Mist collector
• Bar feed interface
• Automatic tool setter
• Hydraulic tailstock
• Additional spare "M" functions
• Oil skimmer
• Collet chucks
• Digital Setup Assistant
• Milltronics Shop View
• Weight: 7050 lbs
• Dimensions: 98.6 x 147.5 x 86.3 in
• X/Z Travels: 7/14 in
• Swing Over Bed: 15.9 in
• Swing Over Cross: 9.45 in
• Max. Turning Diameter: 12.4 in
• Max. Turning Length: 13.4 in
• Spindle Nose: A2-5
• Draw Tube Diameter: 1.77 in
• Spindle Range: 0-6000 RPM
• AC Spindle Motor: 17/10 HP
• Spindle Torque: 83 ft-lbs
• Tailstock Quill Travel: 3.46 in
• Tailstock Quill Diameter: 2.28 in
• Tailstock Quill Taper: MT4
• Tool Capacity: 12
• Tooling Size: .75 in
• Boring Bar Capacity: 1.25 in
• Tool Selection: Bi-Directional
• Rapid Traverse Rate: 1181 IPM
• Positioning Accuracy: (+/- 0.0002 in)
• Repeatability: 0.0002 in
• Axis Thrust Force: 1851 lb-ft Peak X, 1851 lb-ft Peak Z
• Machine Weight: 7050 lbs
• Machine Height: 86.3 in
• Footprint: 126 x 82.2 in Nominal Operating (W x D)
• Power Required: 13 KVA / 32 Amps
• Voltage Required: 208-240 Volts / 3 Phase