Milltronics SL10-II
Horizontal Turning Center

---

Overview

Machine Features

• 3-jaw hydraulic chuck with foot switch
• 12 position auto turret with 1? slots
• True slant bed with one-piece base casting
• Linear motion guideways with roller type bearings
• Full enclosure with sliding door
• Flood coolant
• Auto lubrication
• Part, wire frame & solid model graphics
• Constant Surface Speed (CSS)
• 120 GB solid-state hard drive
• 15? LCD color touch screen display
• Spindle load meter
• LCD hour meter
• One-year warranty
• Parts catcher
• Mist collector
• Bar feed interface
• Bi-directional turning cycle
• Automatic tool setter
• Hydraulic tailstock
• Additional spare "M" functions
• Chip conveyor
• Oil skimmer
• Collet chucks
• Digital Setup Assistant
• Milltronics Shop View
• Weight: 10670 lbs
• Dimensions: 110.4 x 191.4 x 88.5 in
• X/Z Travels: 9.8/31.1 in
• Swing Over Bed: 22.9 in
• Swing Over Cross: 15.8 in
• Max. Turning Diameter: 17.7 in
• Max. Turning Length: 29.9 in
• Spindle Nose: A2-8
• Draw Tube Diameter: 3.18 in
• Spindle Range: 0-3000 RPM
• AC Spindle Motor: 29.5/20 HP
• Spindle Torque: 260 ft-lbs
• Tailstock Quill Travel: 4.7 in
• Tailstock Quill Diameter: 3.54 in
• Tailstock Quill Taper: MT5
• Tool Capacity: 12
• Tooling Size: 1 in
• Boring Bar Capacity: 1.5 in
• Tool Selection: Bi-Directional
• Rapid Traverse Rate: 1183 IPM
• Positioning Accuracy: (+/- 0.0002 in)
• Repeatability: 0.0002 in
• Axis Thrust Force: 3125 lb-ft Peak X, 3125 lb-ft Peak Z
• Machine Weight: 10670 lbs
• Machine Height: 88.5 in
• Footprint: 166 x 94.8 in Nominal Operating (W x D)
• Power Required: 24 KVA / 59 Amps
• Voltage Required: 208-240 Volts / 3 Phase