Compare Hyundai WIA's KF4600II to the Competition

MANUFACTURER HYUNDAI HAAS DOOSAN
MODEL KF4600II VF2SS DNM4500
PRICE $73,900 $67,995 -
Through spindle coolant system, 290 PSI included $6,995 included
Chip conveyor and (2) Y-axis augers included $6,295 Optional
90 gallon coolant tank included $2,395 Optional
Coolant bed flushing (cast iron & aluminum chips) included Not an option Not an option
12,000 RPM w/ refrigerated spindle chiller included *Liquid cooled (Not specific) included
Probe ready w/ receiver, bracket, wiring, GUI software - for probe install) included Not an option included
Linear guide type Roller way (Rigidity) Ball way Roller way (Rigidity)
User definable custom macros included $3,295 included
Coordinate rotation (G68) and scaling (G69) included $1,695 included
Spindle orientation (M19) included $1,195 included
TOTAL PRICE $73,900 $89,865 -
Only Multi (3) Augers available at $6,295.00 or Single Front auger is $2,995.00 -
Renishaw spindle probe & tool probe $6,295 $6,295 -
SUB TOTAL $80,195 $96,160 -
MANUFACTURER HYUNDAI HAAS DOOSAN
SPECIFICATIONS:
Controller Fanuc Oi-F ""Plus "" Haas ""NextGen"" Fanuc Oi-F
Screen type / functionality 15″ LCD Color w/ Touch Screen 15″ LCD Color w/ Touch Screen 15″ LCD Color
Conversational control Smart Guide i - Conversational Haas - Conversational Manual Guide i - Conversational
Block look-ahead 200 80 200
Spindle drive, motor & servos Fanuc package (highest reliability) Haas Components (?) Fanuc package (highest reliability)
X and Y-axis travel 35.4″ x 18.1″ 30″ x 16″ 31.5″ x 17.1″
Z-axis travel 20.5″ 20″ 20.1″
Table to spindle nose 5.9″ - 26.4″ 4″ - 24″ 5.9″ - 26″
Spindle nose to table surface 32.3″ 28″ 31.9″
Rapid traverse rates (X, Y, Z) 1,417/1,417/1,181 IPM 1,400/1,400/1,400 IPM 1,417/1,417/1,181 IPM
Linear guideways X, Y & Z Roller Guide Ways Ball Guide Ways Roller Guide Ways
Pretension ballscrew bearing (Rigidity) 3 rows of bearings 1 bearing 2 rows of bearings
Table size, length x width 41.3″ x 18.1″ 36″ x 14″ 39.4″ x 17.7″
Load capacity (Max rapids speeds) 1,323 lbs. 1,500 lbs. (Doubtful) 1,320 lbs.
MANUFACTURER HYUNDAI HAAS DOOSAN
Spindle speed, Inline direct coupled 12,000 RPM 12,000 RPM 12,000 RPM
Spindle HP 25 HP 30 HP (Haas power rating peak) 25 HP
Spindle torque, 15 minute rating 87 lbs.-ft @ 1,500 RPM 88 ft. lbs. @ 1,500 RPM (200% Load) 87 lbs.-ft @ 1,500 RPM
CAT #40 spindle, ″Dual Contact Taper″ Yes - Dual contact No Yes - Dual contact
Refrigerated spindle oil chiller Yes *Liquid cooled(?) Yes
Side mount 30 Tools 30+1 Tools 30 Tools
Tool to tool 1.4 seconds 1.8 Seconds (Avg. rating) 1.2 seconds
Chip to chip 3.2 Seconds 2.4 seconds (Avg. rating) 3.2 Seconds
Tool weight 17.6 lbs. 12 lbs. 17.6 lbs.
Maximum tool diameter full 3.1″ 2.5″ 3.1″
Maximum tool adjacent empty 4.9″ 5″ 4.9″
Tank size 90 gallon 55 Gallons 68 Gallons
Automatic type Grease Grease Grease
Width x Depth (Chip conveyance) 107.5″ x 86.3″ (+ 42″ for C.C.) 121″ x 78″ (w/ Single Auger) 103″ x 85″ (+ 40″ for C.C.)
Height, max 119.2″ 109″ 117.5″
Weight, lbs. 12,125 lbs. 7,800 lbs. 11,023 lbs.
Bed leveling & mass support points 8 points 4 points 8 points